Peaq PDR150BT-B Manual De Instrucciones página 31

Note
If no DAB reception is currently available,
change the position of your device or ad-
just the aerial. Press and hold the TUNE
+ button to start a new search.
2. In DAB mode, press the TUNE + button
to navigate through the available DAB
channels.
3. You can store the DAB channels in the
program memory. In DAB/channel list
mode, press and hold the PRESET but-
ton for 2 seconds. Use the TUNE +/– but-
ton to select a program memory between
1 and 10 and then press the SELECT
button to assign the channel.
4. Using the PRESET button, you can
choose between your saved program list
and the automatically created channel list.
5. For additional settings in DAB radio mode,
press the INFO/MENU button. Choose
the required menu item by pressing the
TUNE +/– button and confirm your cho-
sen settings by pressing SELECT.
• Full Scan: Automatic channel search
of all channels in the channel list
• Manual tune: Frequencies can be
manually selected
• DRC (Dynamic Range Control): Ad-
just and change the dynamic range
• Prune: Removes all invalid channels
from the channel list
• System: see section on Settings
VHF RADIO MODE
IM_PDR150_150116_V03_HR.indb 31
In this mode, the radio receives a VHF signal
and displays information about the radio
station, etc.
1. Press and hold the MODE button until
2. Press the TUNE +/– button to search
3. Assign your chosen channel to the pro-
4. Using the PRESET button, you can
FM
FM appears on the display.
through the entire frequency band.
Note
If you hold the TUNE +/– for longer, this
begins a search which stops automatical-
ly once the next station has been found.
gram memory between 1 and 10. In FM
mode, press and hold the PRESET but-
ton for 2 seconds. Using the TUNE +/–
button, choose a program memory be-
tween 1 and 10 and press the SELECT
button to assign the channel.
switch between your saved program list
and the VHF frequency band.
ENGLISH
31
16/1/15 5:03 PM