"click"
8
A
(1)
(2)
(1)
9
b
(1)
(2)
1
2
10
"click"
"click"
"click"
a
(2)
(3)
b
(2)
(12.a)
a
2
1
(2)
(3)
2
2x AA 1,5V
• ENGLISH •
ASSEMBLY
"click"
ATTACHING GAME "4"
"click"
Insert the game bar into its housing, located in
"click"
the rear part of the TOP upper frame, facing the
"click"
A
direction shown in the diagram. The fastening
tabs on the game bar must go beyond the slots,
in the lower part of the frame. Rotate the games
(3)
clockwise to lock them into position, gripping the
rod "A". IMPORTANT: Do not rotate the ring at the
base of the game.
(3)
Make sure that it is correctly mounted.
MOUNTING GAME "1" ON THE TRAY WITH
MUSICAL GAMES
Insert the game into its housing. Press down and at
the same time rotate the game clockwise, until you
(3)
hear a click, indicating that it is mounted correctly.
INSERTING BATTERIES INTO THE MUSICAL
GAME STATION
The musical game works with two AA batteries (not
included).
To insert the batteries, remove the safety screw,
2x AA 1,5V
slide off the cover and lift as shown in the diagram.
Insert the batteries the right way round as indicated.
To close the cover, repeat the process in reverse,
then tighten the safety screw. Make sure that it is
closed correctly.
ATTACHING THE TRAY WITH MUSICAL GAMES
Insert the tray with musical games into its own
housing, located in the front part of the TOP upper
frame, facing the direction shown in the diagram.
Rotate the locking devices on the underside of the
frame in a clockwise direction, to secure the tray to
the frame. Make sure that it is correctly mounted.
15
2x AA 1,5V