BLENDER FUNCTION
1. Place the sport bottle on a flat surface , open the bottle ,
2. Fill the bottle with your favorite ingredients , all the ingredient must be filled below the bottle
max level mark,
3. Fasten the blade base on the open end of the bottle ,
4. Turn the bottle upside down , put the bottle and blade base together on the blender base, ensure
the three micro switch block in right position ,
5. Press the middle button to start the machine, release your finger the machine will stop
6. Unlock the bottle from the base
7. Turn the bottle over and place on a flat surface, take out the blade base, put the drinking lid on.
Notes
1. The appliance is only permitted to use 60's continuously maximum. Before it's used again, it
must cool down enough.
2.
Except the bottle and cap, others parts and unit are not dishwasher safe.
3. Do not use for only ice crushing, should with water together
4. When blending, need to with water or others liquid together. Cut fruit first in pieces.
When overload, motor will automatically stop, please unplug, empty cup, wait for 20minutes
to cool down motor, after can use again.
CLEANING
Do not use abrasives, scourers, alcohol, etc to clean the
appliance.
Never immerse the motor unit in water and never clean it in
the dishwasher.
1. Unplug the appliance and disassemble it.
For extra thorough cleaning, you can also remove the
sealing ring and non-slip ring.
2. Clean the bowl, the lid, the blade unit, the sealing ring
and the non-slip ring in the warm water with some washing-
up liquid.
3.Clean the motor unit with a moist cloth.
HOUSEHOLD USE ONLY