Hkoenig MIX75 Manual De Instrucciones página 2

approved service center, checked or repaired.
10. If the supply cord is damaged, it must be replaced by approved service
center.
11. Don't let excess cord hang over the edge of the table or worktop or touch
hot surface.
12. The blades are very sharp!
13. Don't place the appliance in the hot ingredients.
14. The appliance is constructed to process normal household quantities.
15. Neither the measuring beaker, nor the chopping bowl is microwave proof.
16. Short-time operating. Use the appliance according to the table of
Processing Guide.
14. If you want to operate the unit for more than one cycle, you should wait at
least 3 minutes before the next working.
15. Do not use the masher to process uncooked food.
16. This device is not intended for use by persons with reduced capacity on
the physical, mental or sensory or lack of experience and knowledge
(including children), unless he has them was asked to monitor or if they have
had instructions on the use of the appliance by a person responsible for their
safety. Children should be supervised to ensure they do not play with the
device.
17. If the power cord is damaged, it must be replaced with an after-sales
service to avoid any danger.
How to use the hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise and baby food as well as for mixing and milkshakes.
1. Take the blender stick on the motor unit until it locks.
2. Introduce the hand blender in the measuring beaker. Then press switch
Ⅱ or choose speed "1"-"5" and press the switchⅠ
3. Take the blender stick out off the motor unit after use.
You can use the hand blender in the measuring beaker and just as well in
any other vessel.
How to use your chopper
1. Chopper is perfectly suited for hard food, such as meat, cheese, onion,
herbs, garlic, carrots, walnuts, almonds, prunes etc.
2. Don't chop extremely hard food, such as ice cubes, nutmeg, coffee beans
and grains.
Before chopping...
1. Carefully remove the chopping bowl lid from the blade. Caution: the
blade is very sharp! Always hold it by the upper plastic part.
2. Place the blade on the center pin of the chopper bowl. Press down the
blade and lock bowl. Always place the chopping bowl
3. Place the food in the chopping bowl.
4. Place the chopping bowl lid on the chopping bowl.
5. Turn the motor unit on the chopping bowl lid until it locks.
6. press switch Ⅱ or choose speed "1"-"5" and press switchⅠto operate the
chopper. During processing, hold the motor unit and the chopper bowl.
7. After use, take the motor unit off the out off chopping bowl lid by pushing
ejection button.
8. Then remove the chopping bowl lid.
9. Carefully take out the blade.
10. Remove the processed food from the chopping bowl.