Waeco ACT-THRM TM-84N Instrucciones De Uso página 25

TM-84N AirConService
8.4 Displaying maximum, minimum and average temperatures
➤ Press the
MAX
MIN
(MIN) or average temperature (AVG).
Note the following diagrams for this:
MAX
➤ Press and hold the
If the automatic switch-off is activated, the reading on the display will be saved and shown
again when the device is switched on again.
8.5 Holding current readings
➤ Press the
HOLD
I
NOTE
When this function is active, all the buttons except
vated.
✓ The temperature display is not updated, even if the measurement shows a value that
is different to the one that is on hold.
➤ Press the
HOLD
8.6 Offsetting readings
You can set a measured reading to 0° and use it as a new zero point.
Press the button to activate the function.
REL
Example:
✓ The display shows 25°.
➤ Press the
REL
✓ The display shows 0°.
✓ If the next temperature reading measures 30 °C then the display will show 5 °C.
➤ Press the
REL
EN
button briefly to calculate and display the maximum (MAX), minimum
MIN AVG
button to display the current readings.
MAX
MIN
button to hold the current reading shown on the display.
button again to deactivate the function.
button.
button to deactivate the function.
Operating the thermometer
and are deacti-
HOLD
25