Starting Up The Appliance - WMF KULT pro Power Instrucciones De Uso

1 Small stopper
2 Large stopper
3 Lid with filling opening
4 Micro filter
5 Pulp container
6 Drip stop
7 Juice spout

Starting up the appliance

Clean all the removable parts before using the appliance for the first time. Ensure
that you do not injure yourself on the sharp blade.
▪ Switch the on/off button to 0 to switch the appliance off.
▪ Remove the required length of cable from the appliance cable storage.
▪ Place the pulp container (5) on the motor base (9).
▪ Place the micro filter (4) on the drive axle (11); you can hear the micro filter (4)
lock into place.
Each time before using the appliance, check if the micro filter (4) is damaged. If
you notice any cracks or other damage you must not use the appliance until the
micro filter (4) has been replaced.
▪ Place the lid with the filling opening (3) on the appliance.
8 Safety lock
9 Motor base
10 Non-slip feet
11 Drive axle
12 On/off switch with 2 speed levels
13 Cable storage
13