Setting Up Your Television - Insignia NS-27HTV Guía Del Usario

NS-27HTV 27-inch Color TV
Item Button Description
29 PAGE Moves to the next page. (TV)
DOWN/
Selects a subtitle language, if
SUBTITLE
available on the disc. (DVD)
30 EPG Displays the electronic program
guide.
31 OK Confirms the selection and enters
into the next menu. (DVD)
32 Arrow Moves through the OSD menu.
(DVD)
33 FREEZE Pauses the current picture during
play. Press again to restart.
34 PBC Turns the navigate feature on or
off. In OFF, the disc begins
playback without entering the
disc's menu. In ON, you must
select play in the disc's menu.
(DVD)
35 INFO Displays the title, chapter, and
elapsed time information during
playback. Press again to remove
information from the screen.
(DVD)
36 ZOOM Zooms in on the picture when
playing DVD discs. (DVD)

Setting up your television

Connecting your television to AC power
Use the AC polarized cord provided for operation
on AC. Insert the AC cord plug into a standard
120V 60 Hz polarized AC power outlet.
Wider hole
and blade
Polarized AC cord plug
(one blade is wider than
the other.)
Note
• Never connect the AC line cord plug to
other than the specified voltage (120V
60 Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a
non-polarized AC outlet, do not attempt to
file or cut the blade. It is your responsibility
to have an electrician replace the obsolete
outlet.
• If you cause a static discharge when
touching the television and the television
fails to function, unplug the television from
the AC outlet, then plug it back in. The
television should work normally.
Installing batteries in the remote control
To install batteries in the remote control:
B
ATTERY PRECAUTIONS
Connecting to an antenna, cable television,
AC power and other equipment
outlet
U
SING COMPOSITE VIDEO
www.insignia-products.com
Before using the remote control, you must install
batteries. Use two AAA size batteries (not
supplied). The batteries may last about one year
depending on how much the remote control is
used. For best performance, the batteries should
be replaced on a yearly basis, or when the
remote operation becomes erratic. Do not mix
old and new batteries or different types.
1 Open the battery compartment cover.
2 Install two AAA batteries (not supplied).
3 Replace the battery compartment cover.
Follow these precautions when using batteries in
this remote control:
• Use only the size and type of batteries
specified.
• Make sure to follow the correct polarity when
installing the batteries as indicated in the
battery compartment. Reversed batteries
may cause damage to the remote control.
• Do not mix different types of batteries
together (such as alkaline and carbon-zinc)
or old batteries with fresh ones.
• If the remote is not to be used for a long
period of time, remove the batteries to
prevent damage or injury from possible
battery leakage.
• Do not try to recharge batteries that are not
intended to be recharged. These batteries
can overheat and rupture (follow battery
manufacturer's directions).
The television can be simultaneously connected
to a VCR, LD player, DVD player, video camera,
and other audio-video equipment.
If your equipment does not have an S-VIDEO
jack, you can connect it using an AV video jack.
For monophonic audio devices, connect the
audio using the AUDIO L jack.
Connect a VCR or other equipment by
connecting its Audio Out (R/L) to the Audio Input
(R/L) jacks on the television.
For monophonic VCR, connect its VCR Audio
Out to the Audio (L) In jacks on the television.
Connect the VCR or other equipment's Video
Out to the Video In jacks on the television. For
more information, see the following diagram.
5