Technical Information - ECG RM 410 Manual De Instrucciones

INSTRUCTIONS FOR USE – BLENDER
The immersion blender is intended for preparing gravies, icings, soups, mayonnaises, children's dishes,
cocktails and milkshakes.
Before using the blender for the first time, fill the bowl half way with water, immerse the blade of the
blender to the bottom of the bowl and blend for several seconds. Rinse the entire attachment and bowl well
afterwards.
1. Insert the ingredients into the mixing bowl or another higher kitchen container. Do not use the blender
to crush ice, cut nuts or other hard food.
2. Place the removable attachment on the motor until it "falls" into place.
3. Uncoil the entire cord and plug into the outlet.
4. Insert the appliance into the mixing bowl containing food and press the desired speed button on the
upper part of the appliance body. Blend in circular motions from the bottom.
5. Release the button to stop the blender. Unplug the power cord from the outlet after you are finished
blending.
Note: Maximum continuous operation of the appliance is 30 seconds when processing soft foods and
liquids. Before further use of the appliance, let it rest for at least 3 minutes.
CLEANING
Disconnect the appliance from the electrical output prior to performing any maintenance. Cleaning shall
always be performed on a cooled appliance! Do not use steel wool, abrasive agents or solvents.
1. Wipe the appliance body with a damp cloth. Never clean it under running water, do not rinse or immerse
the iron into water! Attach the attachment back on to the appliance body.
2. Wash the blade in warm soap water. We do not recommend washing the dishes in a dishwasher.
Always make sure the immersion blender is completely cooled, clean and dry before putting it away.
Quick rinsing
Between individual blending tasks, hold the immersion blender in a glass, half filled with water and leave the
blender running for a few seconds.
Attention
The plastic parts of the appliance may become coloured after processing colourful foods.

TECHNICAL INFORMATION

Nominal voltage: 220–240 V ~ 50/60 Hz
Nominal input power: 400 W
GB
19