Nosepiece Table - Rivets Per Battery Charge; Safety Instructions - Pop MCS 5800 Instrucciones De Manejo

1.4. Nosepiece table – Rivets per battery charge
Mandrel Body
Diameter Ø
mm mm
1.63 3.2
1.83 3.2
1.93 3.2
2.18 4
2.29 4
4
2.41 4
2.45 4
2.64 4.8
4.8
5
2.9 4.8
4.8
* available as special accessories.
Blind Rivet Ø
in mm
2,4
3,0 a.3,2
3,0 a.3,2
3,0 a.3,2
4,0
4,0
4,0
4,8 a.5,0
4,8 a.5,0
4,8 a.5,0

1.5. Safety instructions

Blind rivet setting tool
Caution:
Following safety rules must be followed
for adequate protection against electrical schock,
injuries or fire hazards:
•
The riveting tool should be used exclusively
to set blind rivets.
•
Do not overload the tool; Work within the
prescribed work capacity.
•
Do not expose the tool to humidity or rain,
do not operate the tool close to inflammable
substances or gases: Risk of explosion!
4
Body
Ø Rivet Body Material /
inch Type
1/8'' Aluminium Closed End
1/8'' Aluminium Open
1/8'' Steel Open
5/32'' Aluminium Closed End
5/32'' Aluminium Open
5/32'' Steel Open
5/32'' Stainless Steel Open
5/32'' Aluminium Peel
3/16'' Aluminium Open
3/16'' Aluminium Closed End
– Aluminium Open
3/16'' Steel Open
3/16'' Stainless Steel Open
Blind Rivet Ø Rivet
in inch body material
3/32'' Alum
1/8'' Alum
1/8'' Steel
1/8'' Stainless Steel
5/32'' Alum
5/32'' Steel
5/32'' Stainless Steel
3/16'' Alum
3/16'' Steel
3/16'' Stainless Steel
Nosepiece
Ref.
MCS 5800-14*
MCS 5800-15*
MCS 5800-16*
MCS 5800-17*
MCS 5800-18*
•
Ensure that the battery is properly secured in
the tool handgrip.
•
Remove the battery when the tool is not in use
and for repair/servicing operations.
•
Do not use the tool as a hammer.
•
When not in use, keep the tool in a dry closed
room, out of reach of children.
•
When working with the tool, always carry
protection goggles. Personal protection like
clothes, gloves, safety helmet, non slipping
shoes, ear protectors and protection against
fall are highly recommended.
Retaining
Nosepiece
Ref.
MCS 5800 -14R *
MCS 5800 -15R*
MCS 5800 -16R*
MCS 5800 -17R*
*
MCS 5800 -18R*
Rivets/
Charge
1.900
1.300
1.100
1.000
1.000
900
800
700
500
400