Speaker Setting; Switching Display; Tel Mute - Kenwood KRC-394 Manual De Instrucciones

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For the OEM speaker
For 6 & 6x9 in. speaker
For 5 & 4 in. speaker
4
Exit Speaker Setting mode
Press the [Q] button.

Switching Display

Switching the information displayed.
Press the [CLK] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information
Program Service name or Frequency
Clock
Display
"SP OFF"
"SP OEM"
"SP 6/6x9"
"SP 5/4"
— 7 —
In Tape source
Information
Play side
Clock
In External disc source
Information
Track Time
Disc name
Disc title
Track title
Clock

TEL Mute

The audio system automatically mutes when a call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system comes back
ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system comes back
ON.
Display
"D-NAME"
"D-TITLE"
"T-TITLE"