Intended Use - Skil 8201-CL Instrucciones De Funcionamiento Y Seguridad

This tool is intended for determining and checking horizontal ad vertical lines.
The tool is suitable exclusively for operation in enclosed working sites.
Inserting/Replacing the Battery
ALWAYS turn off the laser and the main
power switch before removing and replacing
the batteries.
Alkaline batteries are recommended for
the tool.
The battery compartment is located on the
back of the unit. Remove the battery cover
by sliding it towards the bottom of the
instrument.
The numbering of the product features shown
refers to the illustration of the tool
on page 3.
1 Power switch
2 Laser mode indicator (LED)
3 Laser aperture
4 Battery compartment
5 1/4-20 tripod mount

Intended Use

Preparation
When inserting, pay attention to the correct
polarity according to the representation on
the inside of the battery compartment.
Always replace all batteries at the same time.
Only use batteries from one brand and with
the identical capacity.
• Remove the batteries from the
tool when not using it for extended
periods. When storing for extended
periods, the batteries can corrode and
discharge themselves.
Features
Other Features (not shown)
6 Laser warning label
7 Protective case*
8 Tripod*
*The accessories illustrated or described are
not included as standard delivery.
-6-