GPO PR200 Manual Del Usuario página 22

- On Main Unit (Amplifier), insert the USB flash drive into the USB
port (8). Press the RECORD button (7) by remote control to start
synchronized recording. Display will show "USB" flashing.
- On Main Unit (Amplifier), Press STOP (11) to stop encoding by
remote control.
RECORDING AND STORING FROM CD TO USB
User can record favourite CD songs in MP3 format and store them on
a memory device via the USB port (8).
1. Set the Function
2. Press the SKIP
the PLAY/PAUSE button (9).
3. Press the RECORD ( 7) to start sync encoding and the display will
show "USB" flashing.
4. Press Skip
RECORD to confirm.
5. Press STOP to stop encoding.
6. Remark: CD recording must be synchronised. Press the STOP
button (11) to confirm.
Note : Some CD's are copyrighted which means that you may not be
able to encode from them. Always make sure you are allowed to copy
from the format you are working with and that you are not infringing
any copyright laws.
22
GPO PR200_user_Manual EU - Oct 2017.indd 22
(4) to CD mode.
or to select the song or track, then press
or to select recording into USB or Press
26/10/2017 10:07