Philips AVENT SCF293/00 Instrucciones De Servicio página 14

14
English
3
Put the plug in the wall socket.
4
Turn the on/off button to "Dry" mode. Then press it to
switch on the appliance.
• Drying will start after about 30 seconds. The appliance
warms up to produce warm air to dry items.
• The progress indicator lights flash and go off gradually to
show the appliance is drying.
• When the drying process is finished, the lights go off and
the appliance switches off automatically.
Caution: The base, the baskets and the lid become hot
during or shortly after operation.
5
Remove the lid.
6
Remove the bottles and other items from the basket. Use the tongs to remove the
smaller items.
Be careful. The dried items may still be hot.
Note: Make sure you wash your hands thoroughly before you touch the dried
items.
Note: The drying result may vary depending on the ambient temperature, ambient
humidity and loading of sterilizer. You can run one more complete drying cycle if
necessary.
7
Unplug the appliance and wait until the appliance has cooled down completely.
Cleaning
Do not use abrasive or aggressive cleaning agents (e.g. bleach) or a scouring pad to
clean this appliance.
Never immerse the base and the power cord in water or any other liquid.
Note: The sterilizer is not dishwasher-proof. The baskets, the bottom plate and the
lid can be cleaned with hot water and liquid dishwashing detergent.
1
Always unplug the appliance and let it cool down before you clean it.
2
Clean the base with a moist cloth.
1
2