Chronograph Operation - BREIL YM92 Manual De Instrucciones

MOVEMENT OF THE CHRONOGRAPH 1/20 – SECOND HAND
• After the chronograph is started, the chronograph 1/20 second hand moves for about
10 minutes and automatically stops at the 0 position.
• When the measurement is stopped or split time is measured, it moves to indicate
the elapsed 1/20 – seconds.
• After the measurement is restarted or split time is released the chronograph 1/20
second hand moves for about 10 minutes and stop automatically.
• In the same manner, as the chronograph is stopped and restarted repeatedly or split
time is measured and released repeatedly the chronograph 1/020 second hand
moves for about 10 minutes and stops automatically.
Before using the chronograph, be sure to check that the crown is set at the normal
position and that the chronograph hands are reset to the 0 position.
• If the hands do not return to the 0 position, follow the procedure in ISETTING THE
TIME AND ADJUSTING THE CHRONOGRAPH HAND POSITION.

CHRONOGRAPH OPERATION

[Standard measurement]
A A
Start Stop
10
B
Reset