Safety Precautions - König Electronic CMP-WNROUT41 Manual De Uso

8.4 Logout
After you have finished the settings completely, click "Yes" on the logout page to logout from the web
management page.
How to install and set-up a router on a cable or ADSL modem
1. Switch the modem off (disconnect from mains power).
2. Switch the PC/laptop off.
3. Connect the LAN output of the modem via LAN cable to the blue port of the router.
4. Connect one of the yellow ports via LAN cable to the PC/laptop.
5. Now switch on the modem and wait until it is fully logged in (this can take a moment).
6. Switch on the router and wait at least 30 seconds.
7. Start up the PC/laptop and wait until it has completely booted.
8. Open your browser and navigate to http://192.168.0.1.
9. Enter user name and password (both by default: admin).
10. Navigate to the Setup Wizzard and click on Auto Detect.
11. Now click on Next and in the following screen click on Apply.
12. Navigate to the menu WLAN settings and ensure that Enable Wireless is checked.
13. Here you can configure your network name (SSID) and the channel.
14. Navigate to the submenu Security Settings and select the security type. We recommend to always select
Mixed WPA/WPA2 – Personal.
15. Select WPA Algorithms as TKIP&AES.
16. Change the password in the field Pass Phrase. We recommend selecting a strong password consisting of
letters, numbers and possibly 1 or more special characters.
17. Click on Apply to store the data.
18. Exit the browser screen; your wireless network and security settings are completed. Optionally you can
disconnect the cable between router and PC/laptop to make a wireless connection (if the PC/laptop is
equipped with a wireless receiver).

Safety precautions:

Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
Caution!
Follow these steps without skipping a step
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water or
moisture.
8