Hoover SY71_SY01 Synua Plus Manual De Instrucciones página 4

GETTING TO KNOW YOUR CLEANER
A. On / Off Button
B. stretch flexi tube
C. Bin release button
D. Bin inlet
E. Bin handle
F. Product neck
G. Cord grip
H. 3in1 tool:
Ha. Crevice Tool
Hb. Furniture Nozzle
Hc. Dusting Brush
I. Carry handle
J. Upper cord hook
K. Flexi tube handle
L. Lower cord hook
M. Flexi tube handle location
N. Blockage inspection hose
O. Dust bin
P. Airvolution unit handle
Q. Filter pack
R. Filter release latch
s. Airvolution system
T. Bin empting latch
U. Dust container door
V. Carpet and Floor Nozzle (GP)**
V1. Hard Floor Nozzle (HF)**
V1a. Furniture Protector
V2b. Locking Pedal
V2. Hard Floor Nozzle (HF)**
V3. Carpet Nozzle (CA)**
W. Parquet Nozzle*
X. Mini-Turbo Nozzle*
Y. Multi-Function Tool*
Za. Rigid Extension Tube
Zb. Long Crevice Tool
*Certain Models Only ** Certain models only, nozzles may vary according to model
PREPARING YOUR CLEANER
1. Remove the accessories from the main packaging. You should find the following:
• Cleaner body
• Cleaner handle
• 3 in1 tool
• Extension tube
• Long crevice tool
• Carpet & Floor Nozzle
• Hard Floor Nozzle**
• Parquet nozzle*
• Carpet Nozzle**
• Mini-turbo nozzle*
• Multi-function tool*
2. Assemble the cleaner handle (Fig. 2a) and fix in position with the supplied screw. (Fig. 2b)
3. secure the 3 in 1 tool to the rear of the cleaner handle. (Fig. 2c)
4. secure the nozzle to the product. (Fig. 2d)
For models equipped with mini-turbo nozzle:*
1. The mini-turbo nozzle can be connected directly to the flexi tube handle. (Fig. 3a)
2. If any blockages are encountered, please open the inspection cover. (Fig. 3b)
3. Ideal to clean soft furnishings and for the pet hairs removal.
For models equipped with Multi- function tool:
• The Multi- function tool can be inserted directly onto the flexible house.
Cord storage:
To store the cord after cleaning:
Wrap the cord around the two cord hooks. (Fig. 4)
NOTE: During cleaning, the cord can be clipped in the cord grip on the rear of the handle to
avoid any interference while cleaning.
USING YOUR CLEANER
Power switch:
To switch the cleaner on, and off press the power button in the centre of the cleaner. (Fig. 5)
Using the flexi tube:
Remove the flexi tube from the handle location in the cleaner. (Fig. 6)
You are immediately ready to use it alone or combined with the accessories, as desired:
• 3 in1 tool (stored on board)
• Extension tube*
• Mini-turbo nozzle*
• Long crevice tool
• Multi-function tool*
The flexi tube gives you the maximum flexibility of usage. (Fig. 7)
2
GB