Imetec P1901 Instrucciones De Uso página 23

• Extract the brush (10a) [Fig. N]
• Clean the brush (10a) using a moist cloth or a brush.
• replace the brush (10a) and fix the brush locking screw (10c) with the aid of a
screwdriver, turning it clockwise
CLEANING THE PORTABLE VACUUM CLEANER TURBO BRUSH (21F)
• remove the portable vacuum cleaner turbo brush locking screw (21f3) with the aid of
a screwdriver, turning it anti-clockwise [Fig. O]
• Extract the brush (21f2) [Fig. P]
• Clean the brush using a moist cloth or a brush.
• replace the brush (21f2) and fix the brush locking screw (21f3) with the aid of a
screwdriver, turning it clockwise.
CLEANING THE MAIN (12) AND SECONDARY (11) DUST COLLECTION SYSTEM
CAUTION! Empty the dust container and clean the
filters after every use in order not to damage the
appliance.
NOTE: Never fill the compartment above the permissible MAX levels (11b and 12e)
Cleaning the main dust collection system (12)
• detach the portable vacuum cleaner (4) from the handle (3)
• Press the main dust collection compartment release button (13) and release the main
dust collection system (12) [Fig. J]
• Extract the plastic filter (12b) using the filter extraction metal handle
• Extract the fabric filter (12a) with the appropriate tab [Fig. K]
• remove the filter guard (12c) turning it clockwise while holding the plastic filter (12b)
using the appropriate handle [Fig.l]
• Empty the dust from the filter guard (12c)
• Empty the dust from the container (12d)
• If required, rinse the dust container (12d), the plastic filter (12b), the filter guard (12c)
and the fabric filter (12a) and allow them to dry.
• Fit the main dust collection system (12) back on and insert it onto the portable vacuum
cleaner (4).
NOTE:
• Replace the filter if damaged or impossible to be thoroughly cleaned.
• Replace the filter at least once a year.
• Failure to clean or replace the filter will make the manufacturer's warranty null
and void.
Cleaning the secondary dust collection system (11)
• To remove the dust container (11c) turn it anti-clockwise [Fig. Q] until the open
compartment position at the indicator triangle
• Empty the dust from the container (11c);
• If required, rinse the dust container (11c) and allow it to dry completely.
EN
21