Polar W.I.N.D. Manual Del Usuario página 3

The Polar Speed Sensor W.I.N.D. is designed to
measure speed and distance when driving. No
other use is intended or implied.
Please follow the pictures on the front cover.
Product Elements
1.
Polar Sulky Mount and Training Computer
(picture 1 A)
2.
Polar Speed Sensor, rubber part and spoke
magnet (picture 1 B)
Installing the Polar Sulky Mount and Training
Computer
You can install the sulky mount and the sulky
computer on the left or right sulky bar
1.
Place the rubber part on sulky bar
and insert the sulky mount on top of it
(picture 2).
2.
Pass the cable ties over the sulky mount and
adjust them around the sulkybar.
Secure the sulky mount rmly. Cut o any
excess cable tie ends (picture 2).
3.
Position the training computer on to the
sulky mount. Turn the training computer
clockwise until you hear a click. You can
release the training computer by pressing it
down and simultaneously turning it counter
clockwise.
Installing the Polar Speed Sensor
To install the speed sensor and spoke magnet,
you will need cutters and a cross-head
screwdriver.
1.
It is recommended to install the speed
sensor on the fork (as in picture 1) of
your sulky.
E N G L I S H
1