Care on your appliance
WARNING:
–
Always remove the plug before cleaning.
–
Under no circumstances should you immerse the motor housing in water in
order to clean it. Otherwise this might result in an electric shock or fire.
CAUTION:
–
Do not use a wire brush or any abrasive items.
–
Do not use any acidic or abrasive detergents.
1. Use a damp or dry cloth to clean the vacuum cleaner. Only clean the
housing and the accessories.
2. Do not use any aggressive cleaning agents or solvents as these may attack
the plastic.
Plastic bucket
Rinse out the bucket after use with clean water.
Any dirt in the bucket can be removed with a sponge or nylon brush.
Cleaning the washable HEPA filter
1. Clean the HEPA filter when the appliance operates for long periods.
2. To remove the HEPA release the clips and remove the motor housing head.
3. Remove the water stopper plate by turning it anti-clockwise. (Fig.8)
4. Rotate the HEPA base anti-clockwise and take it out. (Fig.7)
5. Quick cleaning: Tap out or brush out the filter to loosen any residues.
Hand wash: If soiling is more severe we recommend a hand wash up to
40°C.
NOTE:
–
Always allow the filters to dry in the open air!
–
Always resume operation with dry filters!
Instructions for use
English
7