English
in accordance with electrical safety regulations. The rated voltage and frequency are stated on
the nameplate. The appliance must be connected to the electrical mains and earthed in
compliance with the relevant regulations and requirements. The appliance is able to withstand
short fluctuations in voltage of no more than 15% less or 10% more than the rated voltage
stated on the nameplate. If the power supply lead has to be replaced, this operation must only
be carried out by a qualified technician. The socket must be accessible after the appliance has
been placed.
Product Description
1. Thermostat & LED lamp
3. Shelf for Vegetable & Fruit box
5. Freezer Drawer
7. Door shelfs
9. Freezer Chamber
Shelves (Glass rack)
Each refrigerator comes complete with several shelves which can be set at different heights by
placing them on the runners provided. Each shelf has a safety fitting to prevent it from being
pulled completely out or accidentally removed. To remove it from the appliance, lift it at the
back and extract it. Then change the position of the shelf or shelves as you require. For easy
removal of all internal accessories, the door has to be opened completely.
Refrigerator compartment defrosting water drain
The rear of the refrigerator compartment, underneath the refrigerating plate, has a channel
and a hole for collecting the defrosting water. To ensure the refrigerator can function properly,
take care never to block this hole. It is best to check and clean it fairly regularly using a piece of
stiff wire.
Fruit and vegetable box
This container is at the bottom of the refrigerator compartment, which is fitted with a glass
shelf to cover fresh foods that require constant humidity for optimum storage.
Door rack and containers
The inside of the door is fitted with special racks and boxes to take eggs, butter, dairy products,
tubes, preserves and other small packages. The bottom of the door has a rack to take vertical
bottles.
All door racks and boxes can be removed for cleaning. To remove the racks, tap upward with
your hand first, on one side of the insertion zone and then on the other side. Do not place
excessively heavy bottles on the bottle rack. Place bottles on the rack gently when loading
them. When removing bottles do not pull them in a diagonal direction as this may over-strain
the retainer rod.
2. Fridge glass shelfs
4. Vegetable & Fruit box
6. Adjustable Legs
8. Fridge Chamber
4