4. Features
•
can be used as clip-on car kit
•
full duplex, DSP technology for noise and echo cancellation
•
independent Bluetooth® headset, taken away easily
•
one-touch answering, call rejection and last number redial
•
supports two profiles - hands free and headset
•
super bright LED caller-ID display in three ways
•
easy fixing on the sun visor
•
rechargeable battery
•
no installation required
5. Overview
Refer to the illustration on page 2 of this manual.
A
ear device
1
USB connector
2
function key
3
status indicator
4
microphone
5
ear plug
6
volume up
7
volume down
6. Installation
•
The device can be used on the table or attached to the cars
sunshield.
•
To attach the base station to the sunshield, first slide the
mounting bracket [H] in the retaining tabs at the back of the
base station.
•
Slide the open end of the mounting bracket [H] over the
sunshield. This can be done in 2 ways (see below). When using
the rear view mirror, set the display to mirrored (see §7).
00 (01/02/2011)
BTSP2
base station
B
speaker
C
volume knob
D
DC jack
E
LCD display
F
charging indicator
G
USB connector
H
mounting bracket
4
®
Velleman