Advanced Settings - Extel O’MOUV Instrucciones De Uso

Wait for the end of the countdown
The light indicator turns on (5 fi g. 1), then after a few seconds
it fl ashes and the camera initialises with a circuit of automatic rotations.
You have a wifi connection, you can disconnect the RJ45 connection.
If WIFI settings using a PC fails, select the
WIFI confi guration using your Android or iPhone
smartphone app which is simpler.
c. Advanced settings
Double click the connected camera to access the advanced settings.
"Camera information"
Camera information
Date and time
Network settings
SD recording programme
User management
Email confi guration
(send an email if necessary)
FTP Confi guration: The FTP (File Transfer Protocol)
allows you to make a remote storage area located on
an FTP server accessible to an FTP client (in this way
you can access the hard disk of a remote computer on
your network or via the Internet). Your IP camera can
connect to an FTP server and save image captures on
it (regular backup or if an alarm is triggered). This sec-
tion will allow your camera to know the information
required to access the desired server.
Camera name: Max. 24 characters with no spaces
Get the IP address from the DHCP server: Get
an automatic IP address
Time the video: Checking the box validates the
weekly schedule. You can then select 15 minute
sequences during which permanent recording will
be activated (by checking the boxes, which then
turn blue)
Visitor
Operator
Administrator
Sender: E-mail address of the sender.
SMTP server: Message server
SMTP Port: SMTP port of the sender used to connect
to the desired STMP server (by default most servers
use port 25).
SSL: Depending on your SMTP server, by default none.
SMTP User: Enter the authentication name of the
sender's email account
SMTP password: Enter the password for the sender's
email account
Recipient: Recipient's email address.
FTP Server: Enter the FTP server's IP address.
FTP Port: Enter the FTP server port (by default port
21).
FTP User: Enter the name required for identifi ca-
tion.
FTP password: Enter the password required for
identifi cation.
Sending frequency (Seconds): Select the time inter-
val between each sent image (1-3600s)
CFI EXTEL O'MOUV - 10/2015
GB8