Malfunction Causes And Remedies - Silvercrest KH 2431 Instrucciones De Uso

Malfunction causes and remedies

Defect
GB
no indications on the
MT
display.
No sound.
The turntable does
not turn, in spite of
the fact that the tone
arm is located in the
playback position.
Poor sound quality,
strong background
noise, sound dropout.
Tone arm jumps,
slides or does not
move forward.
Interference with the
radio reception.
NO USB is indi-
cated.
86
The following chart will assist with the localising and remedy of minor malfunctions:
Possible cause
The device is not
switched on.
The plug is not inserted.
The mains power socket
is not supplying power.
The sound volume is set
to minimum.
A pair of headphones is
connected.
Playback of the audio
device is not started.
false operating mode
selected
The button PHONO
is pressed.
▸II
Needle is worn out.
The device is not standing
level.
Anti-skating set incor-
rectly.
Tracking force is set
incorrectly.
The transmitter is not
properly adjusted.
The reception is weak.
A USB data carrier is not
connected.
Incorrect format.
Troubleshooting
Solution
Switch the device on.
Insert the plug into the mains
power socket.
Check the house fuse.
Increase the playback volume.
Disconnect the headphones from the
connection socket .
Start playback of the audio device.
Select the operating mode PHONO.
Press the button PHONO ▸II
once again.
Replace the needle.
Stand the device on a level surface.
Check the anti-skating settings.
Check the settings for the tracking
force.
Select the desired radio station with
the buttons I◂◂ or ▸▸I
Try to improve reception by realigning
the wire aerial .
Connect a USB data carrier to the
port .
Ensure that the data carrier is formatted
for the FAT32 fi le system.
correctly.
KH 2431