Channel List; Add Channels - Sylvania LC320SS1 Manual Del Propietário

Channel List

The channels selected here can be skipped when selecting the
channels using CH + / – .
Those channels can still be selected with the Number buttons.
1
Press MENU to display the main menu.
2
Use ▲/▼ to select [Setup], then press OK.
3
Use ▲/▼ to select [Channel List], then press OK.
4
Use ▲/▼ to select the channel you want to remove, then
press OK.
Channel List
Picture
Highlight channels for Ch
Sound
Up / Down key selection.
Setup
Features
Language
• The channel display for the removed channel darkens.
You will not be able to select the channel again using
CH + / – .
• To reactivate a removed channel, use ▲/▼ and press
OK. The registered channels are highlighted.
• When you remove a main channel, its subchannels are
removed as well.
5
Press MENU to exit.
Note
•
The channel with the [DTV] indicated on the display is ATSC.
Otherwise the channel is NTSC.
20
EN
DTV
DTV
DTV
DTV
Ch Select Watch/Skip Back

Add Channels

This function lets you add the channels that were not added
by the autoprogram due to reception conditions at the initial
setting.
1
Press MENU to display the main menu.
2
Use ▲/▼ to select [Setup], then press OK.
3
Use ▲/▼ to select [Add Channels], then press OK.
4
Use the Number buttons to enter the number of the
channel you want to add, then press OK.
6.1
27.1
8.1
Picture
9.1
48.1
Sound
58.1
Setup
67.1
Features
Language
5
Press MENU to exit.
Note
•
If setup completes successfully, [Added to the channel list] is displayed.
•
If external input is used, it is not possible to register the channel and
[Unavailable] will be displayed on the TV screen.
•
By using CH + / – , you can select the memorized channels only.
Add Channels
Add Channels
For analog channels, select a
channel to be added using number
keys.
For digital channels, you must
perform Autoprogram function.
Ch Change Back
11