Product Key - Sharp MX-FRX7U Manual De Instrucciones

DISABLING RESEND KEY
This setting is used to disable display of the [RESEND] key, which is used to transmit to the
last destination transmitted to. To disable display of the [RESEND] key, touch the checkbox
so that a checkmark appears. When the [RESEND] key is disabled, it will not appear in the
main screens of fax mode and scanner mode (page 1-4 of the Facsimile Expansion Kit AR-
FX12 manual and page 1-11 of the "OPERATION MANUAL (for image send)"). (Normally
the key appears in these screens.)
This function is initially disabled.
RELEASE THE LOCK ON PRINT-HOLD DATA MANIPULATION
This program can only be used when there are print hold jobs that are locked because an
incorrect pass code was entered. To release all locked print hold jobs, touch the [RELEASE]
key in the "RELEASE THE LOCK ON PRINT-HOLD DATA MANIPULATION" screen. When
there are no locked jobs, the [RELEASE THE LOCK ON PRINT-HOLD DATA
MANIPULATION] key in the "SECURITY SETTINGS" menu screen is grayed out.

PRODUCT KEY

To initially enable the security function, you must use a administrator setting to enter the
product key (password). The name of the administrator setting used for this purpose is
"DATA SECURITY KIT". Please ask your dealer for the product key.
Touch the [DATA SECURITY KIT] key, enter the product key with the numeric keys, and then
touch the [ENTER] key.
●
If an incorrect number is entered...
A message will appear instructing you to check the product key number again.
●
If the correct number is entered...
A message will appear instructing you to turn the power off and then on. Touch the [OK]
key when you have finished reading the message. Turn first the power switch off. The
security function will be enabled when the power is turned on again.
Once the security function is enabled, the [DATA SECURITY KIT] key will no longer
appear in the product key entry screen.
11
ENGLISH