Scope Of Supply; Connecting The Components - E-Bench KH 2074 Instrucciones De Manejo

• Warranty or liability will not be accepted for damage to the device resulting
from improper handling.

Scope of supply

1 Camera
1 Receiver
1 Wall bracket
2 2.4 GHz aerials
2 Mains adapters (12 V ~ 500 mA)
1 SCART cable (1.5 m)
Operating elements and connections on the camera
A) 8 mm image converter
B) Waterproof lens protector
C) Microphone
D) 12 V power supply cable
Operating elements on the receiver
E) Switch on/off (switching to the AV source)
F) Red LED function control lamp
G) Red LED channel display
H) Cable with SCART-output
I) 2.4 GHz aerial
J) AV-, SCART-input
K) 12 V jack for power connection

Connecting the components

First of all, attach the aerials to the jacks on the back of the receiver and the camera
and make sure they are firmly in place. Put the three parts of the wall bracket together
Œ
(see Fig. ). Then mount the wall bracket onto a suitable wall using the fastening
material included; place the camera on the set screw at the top end of the bracket and
tighten it using the knurled screw (see Fig.
using the wing screw. Now connect the power supply cable to the power cable of the
mains adapter and then insert this in a mains socket.
Connect the receiver to a television set using the SCART-cable, connect the power
supply cable of the mains adapter to the receiver and insert the mains adapter in a
socket. When the receiver is switched on, a red control LED lights up on the front,
showing the device is ready for operation.^
50

). Fix the camera in the required position