Descargar Imprimir esta página

S&P SPLIT 2000 PTC Instrucciones De Uso página 12

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

The heater should not be placed immediately under a base of power
point.
The heater should be placed such that the powersupply is always
available.
The heater can be used as a fixed heater (mounted in a wall).
The heater cannot be connected to a programmer, timer or other de-
vice that controls the heater connection automatically.
Do not install the heater on a plastic wall.
Do not use this heater near a bath, shower or a swimming pool.
Do not use the product in rooms filled with explosive gases or vapours
generated by solvents and paints or that are inflammable.
Do not insert any rigid body through the grilles, this could damage the
heater, start a fire or electric shock.
Never leave your home with the product still running. If you do go out
make sure that the switch is off.
The minimum height of the installation is 1.8 metres, as shown in Fig
2.
The device has high surface temperatures, which must not be
touched, even after it has been switched off.
CAUTION: Some parts of this product may be become hot and cause
burns. Particular attention should be when children and vulnerable
people are present.
In order to avoid overheating, do not cover the heater.
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
12

Publicidad

loading