TECshow NEBULA 18 Manual De Usuario página 6

Performance Mode
Select the Shnd menu, press the Enter key to de-
termine. To use Down/Up button to performance
mode: FADE (Gradient), SOUN (Sound), AUTO (Au-
tomatic), COLOR (Color) mode, select the desired
mode, press Enter to determine and save. Not to
make any changes, wait a minute to automatical-
ly exit the menu and save. To main menu, please
press the Menu button. FADE (Gradient) SP1 - SP8,
8 fades speed selection, use Down/Up button to
select the gradient speed required, according to
Enter, determine and save. Not to make any chang-
es, wait a minute and automatically exit the Menu
and save. To main menu, please press the Menu
button. Color (Color) CO1 - CO16, 16 program mode,
and also press Stro (Strobe) have 0-255 to adjust
the speed, use the Down/Up button to select the
desired mode. Press Enter to determine and save.
Not to make any changes, wait a minute to auto-
matically exit the menu and save.
Strobe
Select the Strobe menu, press the Enter key to
determine. Then use the Down/Up button to set the
Strobe mode: 000-255 strobe patterns. Select the
Sound mode, press Enter to determine and save.
Not no make any changes, wait a minute to auto-
matically exit the menu and save. To main menu,
please press the Menu button.
Sound Sense
Select the Sound menu, press the Enter Key to
determine. Then use the Down/Up button to set
the sound mode: 0-100 sound control sensitivity.
Select the Sound mode, press Enter to determine
and save. Not to make any changes, wait a minute
to automatically exit the menu and save. To main
menu, please press the Menu button.
Backlight Mode
Select the LED menu, press the Enter key to de-
termine. Then use the Down/Up button to set the
backlight mode: On (open), Off (close). Select the
desired mode, press Enter to determine and save.
P. 6
Tecshow Nebula 18 | English version
Not to make any changes, wait a minute to auto-
matically exit the menu and save. To main menu,
please pres the Menu button.
Show positive and negative direction
Select the diSP menu, press the Enter key to deter-
mine. Use the Down/Up button to display mode:
diSP (positive), DISP (reverse). Select the desired
mode, press Enter to determine and save. Not to
make any changes, wait a minute to automatical-
ly exit the menu and save. To main menu, please
press the Menu button.
White Balance
Select the BALA menu, press the Enter key to de-
termine. Use the Down/Up to display mode: Red
(Red), Gree (Green), Blue, select the desired mode,
press Enter to determine and save. Not no make
any changes, wait a moment to automatically exit
the menu and save. To main menu, please press
the Menu button. Red with 125-255 using Down/Up
button to brightness. Press Enter to define and save.
Not to maje any changes, wait a minute to automat-
ically exit the menu and save. To main menu, please
press the Menu button. Gree (Green) with 125-255
using the Down/Up button to brightness. Press Enter
to define and save. Not to make any changes, wait a
minute to automatically exit the menu and save.
Language
Select the Language Menu, press the ENTER key to
determine. You can see the use of machine Lan-
guage. Not to make any changes, wait a minute
to automatically exit the menu and save. To main
menu, please press the Menu button.
Temperature
Select the Temp menu, press the Enter key to deter-
mine. You can see the machine light board tem-
peratura/degree. Not to make any changes, wait a
minute to automatically exit the menu and save. To
main menu, please press the Menu button.