VITO PRO-POWER VIBSFL18 Manual De Instrucciones página 13

EN
Fig. 9
1
2
3
4
5
1. Turn off from the main power
before charging.
2. After inserting the battery into
the charger, turn on the power.
Red LED lights up.
3. The green LED lights up when
the battery is fully charged.
4. Turn of from the main power
after full load.
5. Remove the battery from the
charger.
Fig. 10
Fig. 11
Do not place batteries in the trash!
Use Recycling Points.
Fig. 12
NOTE: keep the engine in
operation when removing the drill
from a hole, this will prevent the drill
from blocking on the refered hole.
MAINTENANCE
Always disconnect the charger
before cleaning it. Use a soft cloth.
Remove the battery before cleaning
the cordless drill.
Keep ventilation openings clean.
13