Front Panel - Denon DJ MC4000 Guia Del Usuario

26. Browse / Library Knob: Turn this knob to navigate through the software. Press the knob
to select an item. Press and hold Shift and then turn this knob to browse quickly through
the tracks in your library.
27. Load: Press this button to load the currently selected track to the deck. Press it quickly
twice to load the same track to both decks ("instant doubles").
28. Back / Panel: Press this button to move to the previous window of the software. Press
and hold Shift and then press this button to cycle through the panels in the software.
29. Load Prep / Open Prep: Press this button to load the currently selected track to the
Prepare Crate.
Press and hold Shift and then press this button to jump to the Prepare Crate in the software.
30. Sampler Pads: Press these pads to play their corresponding samples in the software's
sampler (1–4). Press and hold Shift and then press a pad to stop its sample playback.
31. Sample Level: Turn this knob to adjust the volume level of the software's sampler.
32. Level Meters: These LEDs display the audio signal level of the master mix (sent out of the
Master Outputs).
33. Mic Volume: Turn these knobs to adjust the volume levels of the corresponding
microphone inputs. The Peak light next to each knob indicates the current signal level by
its color: green (low), amber (normal/optimal), or red (maximum/peak).
Important: The audio signals from the microphones are routed directly to the Master
Outputs. They are not routed into/through the software.
34. Mic Echo: Press this button to activate/deactivate the reverb effect on the microphones'
audio signal.
35. Mic Talk Over / Post: Press this button to activate/deactivate the "talkover" feature,
which automatically reduces the volume level of the master mix when you speak into the
microphone.
Press and hold Shift and then press this button to activate/deactivate the "post" feature.
When on, the microphones' signal will not be sent to the Booth Outputs.
36. Master: Turn this knob to adjust the volume level of the Master Outputs. This does not
affect the microphone output volume, which is summed with the master mix post-
software. Use the Mic Volume knobs to control the microphone volume.
37. Booth: Turn this knob to adjust the volume level of the Booth Outputs.
38. Aux: Turn this knob to adjust the input volume of the Aux Inputs.

Front Panel

1
2 3
1. Phones Outputs (1/4" or 1/8" / 6.35 mm or 3.5 mm): Connect headphones to these 1/4"
(6.35 mm) and 1/8" (3.5 mm) jacks for monitoring the signal. The headphone volume is
controlled using the Monitor Level knob.
2. Monitor Level: Adjusts the volume for headphone cueing in the software.
3. Monitor Pan: Adjusts the software's audio output to the headphones, mixing between the
cue output and the master mix output.
6
4
5 5 5 5 6