Specifications - Classe CA-5100 Manual De Instrucciones

Specifications
Classé Audio reserves the right to make improvements without notice.
■ Power output
(all channels driven)
■ Frequency response
■ Phase
■ Signal-to-noise ratio
■ Channel separation
■ Noise floor (FFT)
■ Distortion (THD + noise)
■ Voltage gain
■ Sensitivity
■ Input Impedance
■ Rated power consumption (as per IEC60065 para. 2.3.10)
■ Idle power consumption
■ Mains voltage
■ Dimensions (not incl. controls or connectors)
■ Shipping weight
■ Net weight
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights
reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
®
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.
100W/ch continuous rms @ 8Ω
200W/ch continuous rms @ 4Ω
10Hz – 22kHz (+0/-0.1dB)
10Hz – 155kHz (+0/-3.0dB)
better than -10° @ 22kHz
(ref. full ouput, 10Hz – 80kHz)
better than 80dB @ 20kHz
all peaks less than -95dBV
(unweighted, 0.8Vrms/1kHz input, 10Hz – 500kHz)
1.0Vrms for rated output @ 8Ω
(cannot be changed by dealer or user).
105dB
(10Hz – 80kHz)
0.003% @ 8Ω
29.1dB
100kΩ
684W
204W
specified on rear panel
Width: 17.5" (445mm)
Height: 6.75" (171mm)
Depth: 18.5" (470mm)
88 lbs (40kg)
75 lbs (34kg)
23