Vesa Wall Mount Procedure - NEC MultiSyns LCD3735WXM Manual Del Usuario

VESA wall mount procedure

1. Disconnect all cables.
2. Place monitor face down on a non-abrasive surface
3. Remove the 4 screws connecting the stand to the montor.
4. Lift up the stand to unlatch the upper hooks and remove the stand.
5. Use the 10 screws to attach the arm to the monitor.
Note: The LCD monitor should only be used with an approved arm (e.g. GS mark).
To meet the safety requirements, the monitor must be mounted to an arm which guaranties the
necessary stability under consideration of the weight if the monitor.
LCD 3735WXM
10 Screws (M6)
(Max Depth: 9.5mm)
E-7