Louis 10040697 Instrucciones De Uso página 9

3 | Safety
3.1 | Intended use
The angled valve stems can be installed on motorcycles with alloy wheels and tubeless tyres if the
valve holes in the rim have a diameter of 11.3 mm and if there is enough space for the valve stems
in the immediate vicinity of the valve hole. The 90° angle of the valve stems not only makes it easier
to inflate your tyres with compressed air, but at the same time lends your wheels an eye-catching
feature.
3.2 | Safety instructions
WARNING!
Danger for children and persons with reduced physical, sensory or mental
abilities (e.g. partially disabled persons, elderly persons with limited physical
and mental abilities) or lack of experience and knowledge of handling
motorcycles (e.g. older children)!
• Keep the packaging film and small parts away from children, as there is a
danger of suffocation.
CAUTION!
Risk of injury!
• All work on your motorcycle wheels and tyres requires a good understanding
of motorcycle mechanics. Have this work carried out by a qualified motorcycle
workshop if you do not have the appropriate training! The simplest thing is to
have the angled valve stems fitted by your local tyre fitting centre when you
next change your tyres.
IMPORTANT!
Risk of damage!
• For safety reasons, unauthorised modification and/or conversion of the product
is not permitted.
• Always use dust caps to protect your angled valve stems against dirt and
pressure loss.
• After doing any work on your tyres or wheels, always check carefully that the
wheels are correctly balanced and fitted, together with all associated parts.
• Always install the angled valve stems so that they are at right-angles to the
direction of travel.
This symbol indicates that the packaging and the product itself can be
recycled.
9