Ordering Of Spare Parts - EINHELL BT-PS 800 Manual De Instrucciones

Anleitung_BT_PS_800_SPK7__ 11.04.14 07:43 Seite 17
12. Cleaning, maintenance and

ordering of spare parts

Danger!
Be sure to switch off the energy station and
disconnect all cables from the unit whenever you
perform any cleaning or maintenance work.
12.1 Cleaning
Keep all safety devices, air vents and the motor
n
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
We recommend that you clean the device
n
immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth
n
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.
12.2 Maintenance
There are no parts inside the equipment which
n
require additional maintenance.
12.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
Type of machine
n
Article number of the machine
n
Identification number of the machine
n
Replacement part number of the part required
n
For our latest prices and information please go to
www.isc-gmbh.info
13. Repair
Should the tool experience problems beyond those
mentioned above, let only an authorized professional
or a customer service shop perform an inspection.
14. Disposal
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to the
raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Rechargeable batteries and cordless electric
machines and tools contain materials that are
potentially harmful to the environment. Never place
any cordless electric machines or tools in your
household refuse. When cordless electric machines
or tools become defective or worn, remove the
rechargeable batteries and return them to iSC GmbH
Eschenstrasse 6, D-94405 Landau, Germany. If the
rechargeable batteries cannot be removed, return
the complete cordless machine or tool. You can then
be sure that the equipment will be correctly disposed
of by the manufacturer.
15. Storage
Store the equipment and accessories in a dark and
dry place at above freezing temperature. The ideal
storage temperature is between 5 and 30 °C. Store
the electric tool in its original packaging.
GB
17