Service; Specific Safety Information; Micro Ca-25 Inspection Camera Safety - RIDGID micro CA-25 Manual De Instrucciones

does not turn it ON and OFF. Any tool
that cannot be controlled with the switch is
dangerous and must be repaired.
• Disconnect the batteries from the e quip -
ment before making any adjustments,
changing accessories, or storing. Such
preventive safety measures reduce the risk
of injury.
• Store idle equipment out of the reach of
children and do not allow persons unfa-
miliar with the equipment or these in-
structions to operate the equipment.
Equipment can be dangerous in the hands
of untrained users.
• Maintain equipment. Check for misalign-
ment or binding of moving parts, missing
parts, breakage of parts and any other
condition that may affect the equipment's
operation. If damaged, have the equip-
ment repaired before use. Many accidents
are caused by poorly maintained equip-
ment.
• Use the equipment and accessories in
accordance with these instructions,
taking into account the working condi-
tions and the work to be performed.
Use of the equipment for operations differ-
ent from those intended could result in a
hazardous situation.
• Use only accessories that are recom-
mended by the manufacturer for your
equipment. Accessories that may be suit-
able for one piece of equipment may be-
come hazardous when used with other
equipment.
• Keep handles dry and clean; free from
oil and grease. Allows for better control of
the equipment.

Service

• Have your equipment serviced by a
qual i fied repair person using on ly iden-
tical replacement parts. This will ensure
that the safety of the tool is maintained.
Specific Safety
Information
WARNING
This section contains important safety in-
formation that is specific to the inspec-
tion camera.
Read these precautions carefully before
micro CA-25 Inspection Camera
using the micro CA-25 In spec tion Cam -
era to reduce the risk of electrical shock
or other serious injury.
SAVE THESE INSTRUCTIONS!
A manual holder is supplied in the carrying
case of the micro CA-25 Inspection Camera
to keep this manual with the tool for use by
the operator.
micro CA-25 Inspection Camera
Safety
• The micro CA-25 imager head and ca ble
are waterproof to 4' (1.2 m). The hand-
held display unit is not. Do not expose
the display unit to water or rain. This in-
creases the risk of electrical shock.
• Do not place the micro CA-25 Inspec -
tion Cam era anywhere that may con-
tain a live electrical charge. This in-
creases the risk of electrical shock.
• Do not place the micro CA-25 Inspec -
tion Cam era anywhere that may con-
tain moving parts. This increases the risk
of entanglement injuries.
• Do not use this device for personal in-
spection or medical use in any way.
This is not a medical device. This could
cause personal injury.
• Always use appropriate personal pro-
tective equipment while handling and
using the micro CA-25 Inspection Cam -
era. Drains and other areas may contain
chemicals, bacteria and other substances
that may be toxic, infectious, cause burns
or other issues. Appropriate personal
protective equipment always includes
safety glasses and gloves, and may in-
clude equipment such as latex or rubber
gloves, face shields, goggles, protective
clothing, respirators and steel-toed foot -
wear.
• Practice good hygiene. Use hot, soapy
wa ter to wash hands and other exposed
body parts exposed to drain contents after
handling or using the micro CA-25 In spec -
tion Camera to inspect drains and other
areas that may contain chemicals or bacte-
ria. Do not eat or smoke while operating or
handling the micro CA-25 Inspection Cam -
era. This will help prevent contamination
with toxic or infectious material.
• Do not operate the micro CA-25 In spec -
tion Camera if operator or device is
3