Soundcore Infini Mini A3370 Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
EN
a. Connect to your TV
OPTICAL
1. Connect optical cable to the optical output port of a stereo audio
machine (such as TV / CD / VCR / DVD player ...etc).
2. Press the OPT button on the remote control to activate optical mode. The
status indicator will be solid green.
Note: the status indicator light will stay on for 10 seconds.
b. AUX-In mode
AUX IN
1. Connect audio cable (3.5mm to RCA stereo audio cable) to the audio
output port of a stereo audio machine (such as TV / CD / VCR / DVD player
...etc).
2. Press the AUX button on the remote control to activate AUX mode. The
status indicator will be solid cyan.
Note: the status indicator light will stay on for 10 seconds.
c. Bluetooth mode
07
TV
SoundCore
Bluetooth ON
Infini Mini
1. Press Power button on the remote control to switch on the Soundbar.
2. Press the Bluetooth button on the remote control to activate Bluetooth
mode.
3. Turn on the Bluetooth of your device, search for Soundcore Infini Mini on
your Bluetooth list then select connect.
Flashing Blue
Bluetooth mode is activated
Solid Blue
Connected to device
Note: the status indicator light will stay on for 10
seconds.
When turned on, Soundcore Infini Mini Soundbar will automatically
T
connect to the last connected device if available. If not, press the
Bluetooth button to activate Bluetooth mode.
Having connection problems? Remove Soundcore Infini Mini from your
device's Bluetooth history and ensure it's less than 10 meters away. Then
try pairing again. To get the best sound quality, make sure there is a clear
line of sight between the connected device and your Soundbar.
d. Respond to your TV remote control
Use your own TV remote control to control your Soundbar (Applicable for
most of Vizio / LG / Philips TVs).
Press and hold Volume-down control and Source input button (on
Soundbar) for more than 3 seconds to activate the remote control learning
mode. The status indicator will flash to white in this stage.
Press Power button on the Soundbar and press the Power button on your
TV remote control simultaneously, then the status indicator will flash to red.
Once your Soundbar is responding to your TV remote control, the status
indicator on the soundbar will be solid red.
Note: only power, source input and volume of your Soundbar can be
controlled by your TV remote control.
EN
08

Publicidad

Tabla de contenido
loading

Tabla de contenido