Engine Maintenance - Troy-Bilt 020241 Manual Del Propietário

Section 5: Maintenance
m
[
Oil Cap
3. Tilt pressure washer to drain off into an approved
container until it drips slowly from pump.
4. Tik pressure washer in opposite direction and empty
premeasured pump off bottle into same opening (a
small funnel may be helpful).
5. Install black pump oil cap and tighten firmly.
6. Set pressure washer in upright position.Add fuel and
engine oil
ENGINE MAINTENANCE
See [he engine owner's manual for instruc[ions on how [o
properly maintain [he engine,
[ CAUTION
D ata Tag
Data tag information is very important if you need help from
our Customer Service Department or an authorized service
dealer.
o The data tag (Figure [7) is located on the base of the
pressure washer. For future reference, please copy the
model revision_ and serial number of the pressure washer
in the space below.
MODEL [
REV NO [
SERIAL [
Copy Hodel
]_'_ Number Here
1_ Copy Revision
Here
Copy Serial
Number Here
PSI [
GPM [
O LT
]
Used motor oil has been shown to cause skin cancer in
certain laboratory animals.
, Thoroughly wash exposed areas with soap and water.
KEEP OUT OF REACH OF CHILDREN. DON'T
POLLUTE. CONSERVE RESOURCES. RETURN
USED O[LTO COLLECTION CENTERS.