Summit SPW1200P Manual Del Usuario página 11

Selecting Wash Cycle:
When you turn the power "ON", the machine will set the standard
wash program to "Heavy" wash position. You will see the red light lit
up at both Heavy wash cycle and Wash Cycle Mode position.
For your convenience, you can select from four fabric care wash cycles: Heavy,
Normal, Gentle and Quick Wash. Select the appropriate cycle based on the fabric
type.
If you want to select your desired option at this time, use down arrow (
the proper wash cycle for your load.
Heavy Cycle:
This is used for work & play, household linens and heavy to lightly soiled cottons
clothes. With heavy wash speed, the agitator moves faster. This cycle is
approximately 44 to 50 minutes.
Note: If you want to select "Soak" option when using this cycle, select "Process
Mode" by pressing left arrow (
setting, press the down arrow (
option. You will see Soak
red light. The soak time will be approximately 35 minutes in this cycle.
Normal Cycle:
This is used for soiled permanent press, silks, woolens, nylon and acrylic fabrics.
With normal wash speed, the agitator moves faster. This cycle is approximately 44
to 50 minutes.
Note: If you want to select "Soak" option when using this cycle, select "Process
Mode" by pressing left arrow (
setting, press the down arrow(
option. You will see Soak
red light. The soak time will be approximately 25 minutes in this cycle.
) on select button. Once you are at that
) five times on select button to set this
Wash Rinse Spin sequence lit up with
) on select button. Once you are at that
) five times on select button to set this
Wash Rinse Spin sequence lit up with
English
) to select
10