CLEANING
Do not immerse the base with motor into water! Clean only with damp cloth.
1.
Unplug the blender from the power supply.
2.
Remove the container from the base of the blender. Remove the lid and pour in a cup of cleaning solution
prepared from a few drops of dishwashing liquid and clean water.
3.
Wash the inside of the container and lid and rinse thoroughly.
4.
Wipe the blender base, the control panel and the power cord using moist cloth or sponge.
5.
Carefully wash the blade unit and seal in warm soapy water and rinse thoroughly.
6.
Do not wash the blade unit, seal and lid in a dishwasher.
7.
When washing the container do not unscrew the blade unit from the container.
TECHNICAL SPECIFICATIONS
Nominal voltage: 220–240 V~50/60 Hz
Nominal input power: 500 W
KB = max. 30 s (maximum grinding time – grinder)
KB = max. 60 s (maximum mixing time – blender)
GB
Noise level: 87 dB
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
WARRANTY: The following situations void the warranty:
Incorrect or inappropriate handling of the device, failure to observe safety measures applicable to the device,
the use of force, alterations or repairs made by a party other than authorized service center.
Components subject to normal wear and tear are not covered under warranty.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
22
08/05