Maintenance Instructions; Lubrication; Autofeed Assembly; Cables - Ridgid Kollmann K-3800 Manual De Uso

Tools – Fit C-31, C-32 and C-33 Cables
Catalog Model
No. No.
62990 T-201
62995 T-202
63000 T-203
63065 T-217
54837 T-204
63005 T-205
63010 T-206
63015 T-207
63020 T-208
63025 T-209
63030 T-210
63035 T-211
63040 T-212
63045 T-213
63050 T-214
63055 T-215
63060 T-216
49002 T-260
Tools – Fits C-44, C-45, and C-46 Cables
Catalog Model
No.
62850 T-101
62855 T-102
27642 T-125
62865 T-104
62870 T-105
62875 T-106
62880 T-107
62930 T-112
62935 T-113
62940 T-114
54842 T-141
54852 T-142
54992 T-270
Refer to Ridge Tool catalog for complete listing of tools
and accessories.

Maintenance Instructions

Make sure machine is unplugged from electrical
system before making any adjustment.

Lubrication

Grease all exposed moving and rotating parts such as
guide tube assembly as required.
1.800.561.8187
K-3800 Drain Cleaning Machine
Description
Straight Auger, 5" Long
" O.D.
Bulb Auger, 1 1 /
8
" O.D.
Bulb Auger, 7 /
8
Drop Head, 4" Long
"C" Cutter - 1"
"
"C" Cutter - 1 3 /
8
Funnel Auger, 3" Long
"
Spiral Cutter, 1 1 /
4
"
Spiral Cutter, 1 1 /
2
Spiral Cutter, 2"
Spade Cutter, 1"
"
Spade Cutter, 1 /
3
8
"
Spade Cutter, 1 3 /
4
4-Blade Cutter, 1"
"
4-Blade Cutter, 1 3 /
8
"
4-Blade Cutter, 1 3 /
4
Chain Knocker, 2"
Tool Set:
- T-202 Bulb Auger
- T-205 "C" Cutter
- T-211 Spade Cutter
- A-13 Pin Key
No. Description
Straight Auger
Funnel Auger
Retrieving Auger
"
"H" Cutter, 2 /
1
2
"
Grease Cutter, 2 1 /
2
"
Grease Cutter, 3 1 /
2
"
Spade Cutter, 1 3 /
4
"
4-Blade Cutter, 1 3 /
4
4-Blade Cutter, 3"
Chain Knocker
Knife Blade Cutter, 1
Knife Blade Cutter, 2
Tool Set:
- T-102 Funnel Auger
- T-142 Knife Blade Cutter
- T-107 Grease Cutter
- A-12 Pin Key
WARNING
www.

Autofeed Assembly

Proper cleaning and lubrication of the autofeed assembly
is advised for long, trouble-free operation. After each
use, hose out autofeed assembly with water and lubricate
with lightweight machine oil.

Cables

Cables should be thoroughly flushed with water to prevent
damaging effects of sediment and drain cleaning com-
pounds. Periodically lubricate cables and couplings with
RIDGID Cable Rust Inhibitor.
When not in use, store cables indoors to prevent deteri-
oration by the elements.
Cables should be replaced when they become severely
corroded or worn. A worn cable can be identified when
outside coils of cable become flat.

Machine Storage

WARNING
doors or well covered in rainy weather. Store the machine
in a locked area that is out of reach of children and peo-
ple unfamiliar with drain cleaners. This machine can
cause serious injury in the hands of untrained users.

Service and Repair

"
1 /
2
"
1 /
2
The "Maintenance Instructions" will take care of most of
the service needs of this machine. Any problems not
addressed by this section should only be handled by an
authorized RIDGID service technician.
Tool should be taken to a RIDGID Independent Auth-
orized Service Center or returned to the factory. All re-
pairs made by Ridge service facilities are warranted
against defects in material and workmanship.
WARNING
cal replacement parts should be used. Failure to follow
these instructions may create a risk of electrical shock or
other serious injury.
Ridge Tool Company
.com
Motor-driven equipment must be kept in-
WARNING
When servicing this machine, only identi-
information@itm.com
13