Waeco CoolPower MPS80 Instrucciones De Uso página 16

General safety instructions
 Disconnect the device from the mains:
– Before cleaning and maintenance
– After use
– Before changing a fuse
 If you disassemble the device:
– Detach all connections
– Make sure that no voltage is present at any of the inputs and
outputs
 The device may not be used if the device itself or the connection
cable are visibly damaged.
 If this power cable for this device is damaged, it must be
replaced by the manufacturer, customer service or a similarly
qualified person in order to prevent safety hazards.
 This device may only be repaired by qualified personnel.
Inadequate repairs may cause serious hazards.
 People (including children) whose physical, sensory or mental
capacities prevent them from using this device safely may not
be allowed to operate it without the supervision of a responsible
adult.
 Electrical devices are not toys.
Always keep and use the appliance out of the reach of children.
 Children must be supervised to ensure that they do not play with
the device.
NOTICE!
A
 Before start-up, check that the voltage specification on the type
plate is the same as that of the power supply.
 Ensure that other objects cannot cause a short circuit at the
contacts of the device.
 Never pull the plug out of the socket by the connection cable.
 Store the device in a dry and cool place.
2.2 Safety when installing the device
DANGER!
D
 Never mount the device anywhere where there is a risk of gas
or dust explosion.
16
CoolPower MPS80
EN