Pleasant Hearth VL-WO18D Manual De Uso página 12

INSTALLATION
ADDING PAN MATERIAL
WARNING: Apply loose material (embers and lava rock [cinders]) per instruction manual. DO
NOT apply extra material not supplied with this appliance. All previously applied loose material
(embers) must be removed prior to reapplication.
1. Open bags of ash bed material (vermiculite), and spread evenly across burner pan to the top. It is
ok to cover the connecting hardware and the burner pan, but DO NOT cover the gas valve.
2. Open Glowing Embers and lightly and evenly cover the Vermiculite that was put into the pan on
step 1 with 1/2" size ember fiber pieces.
3. Place the Lava Rock around the burner assembly. DO NOT place inside of heater
or on logs. Place desired amount of lava rock on the fireplace floor only.
11