Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
washing a load of laundry
7. Once the Start/Pause button is pressed the "PS" will start to blink.
Once it starts blinking the phone will automatically start to connect.
8. After the "PS" is displayed, press the Temp & Start/Pause buttons
simultaneously for 3 seconds. Please wait until the Smart Control
Enabled icon [
starts blinking, press and hold the Signal on/off button for 3 seconds
to activate the Smart Control. If the Smart Control is enabled, the
Smart Control enabled icon [
9. Press the washer name tab to connect to the washer.
42_ washing a load of laundry
WF455AG-03159A-03_EN.indd Sec5:42
WF455AG-03159A-03_EN.indd Sec5:42
] starts blinking. If the Smart Control enabled icon
] is turned on.
Figure 8
Figure 9
Figure 10
2012-08-31
2012-08-31
12:31:57
12:31:57
Publicidad
Capítulos
Tabla de contenido
