Using The Headphones - Pioneer SE-NC70S Manual De Instrucciones

Using the Headphones

To protect your ears from damage, always
rotate the volume dial of the headphones or
your music device to its lowest position before
wearing the headphones.
1 Attach one end of the furnished
connection cord to the headphones, and
the other end to your music playback
device.
2 Adjust the length of the headband as
you place the headphones over your head.
Place the (R) housing over your right ear, and
the (L) housing over your left ear.
3 Use the VOLUME control dial to adjust
the sound volume.
The sound volume can be adjusted even when
the power switch is set to OFF.
Note
• When disconnecting the cord, pull on the
plug, not the cord.
• When connecting the headphones to an
airline onboard audio system, use the
supplied plug adapter (the adapter may not
comply with the systems used on some
airlines).
• Do not use with airline onboard sound
systems under the following conditions:
– Whenever the cabin crew announces
that electronic devices are prohibited.
– When the use of privately owned
headphones is prohibited inside the
plane.
• When not using the headphones, set the
power switch to OFF.
Normal headphones use
1 Set the headphones' power switch to
OFF.
Music can be heard even when the power
switch is set to OFF. Sound will be produced in
conventional 2-channel stereo playback, but
the noise-canceller and SRS surround effects
will not function.
Noise canceller
1 Set the headphones' power switch to
ON1.
The green power indicator will light, and sound
will be heard in 2-channel stereo playback. The
noise canceller function will operate, reducing
the effect of environmental noise and allowing
you to listen at a sound volume lower than that
used when the power switch is set to OFF.
5
En