Using The Timer; Setting The Clock; Display Mode Setting; Changing The Clock's Display Mode - Pioneer XW-NAS5 Manual De Instrucciones

08

Using the timer

Chapter 8:
Using the timer

Setting the clock

Setting the clock allows you to use the timer.
PRESET
SLEEP
CLOCK
1 Switch the unit into standby.
2 Press SETUP.
Use / to select '
3
ENTER.
The current time is displayed.
Use / to set the hour, then press
4
ENTER.
Use / to set the minute, then press
5
ENTER.
When the setting is completed, the newly set
value flashes for 3 seconds, then the power
returns to standby mode.

Display mode setting

Use to switch the display mode (clock display,
etc.)
1 With the power turned ON, press SETUP.
Use / to select '
2
ENTER.
The current time is displayed.
Note
1 You'll need to set the clock again if you unplug the unit (or in case of a power failure).
2 When power is ON or in standby mode, the current time can be checked by pressing the CLOCK button.
20
En
PRESET
ENTER
TUNE
BASS/
WAKE
TREBLE
UP
TUNE
TUNER
SETUP
PRESET
', then press
', then press
Use / to select display setting, then
3
press ENTER.
• – Display is turned off except when
1
entering commands.
• – Clock display appears except
when entering commands.
• – Displays values constantly except
when entering commands. When power is
on standby mode, displays clock.

Changing the clock's display mode

You can choose to display the clock in 12-hour
mode or 24-hour mode.
• Default setting:
1 Switch the unit into standby.
2 Press SETUP.
Use / to select '
3
ENTER.
Use / to select '
4
press ENTER.
When the setting is completed, the newly set
value flashes for 3 seconds, then the power
returns to standby mode.

Setting the wake-up timer

Use the wake-up timer to set the unit to switch
on at any time and start playing whatever
source you want.
If iPod is selected as the timer sound, when the
wake-up timer operates, the iPod's power will
automatically turn ON and playback will begin.
2
2
(24-hour mode)
' then press
' or ' ' then