Visor Removal Instruction; Visor Installation Instruction - MTR DEMI-JET 5 Instrucciones De Uso

2 | Visor removal instruction

1. Use a screwdriver to pry up the inner cap.
2. Remove the screw in the centre.
3. Remove the visor plate.
4. Remove the visor
1
3

3 | Visor installation instruction

1. Put the visor feet as red part into the gap of the base.
2. Move the visor to the topest.
3. Press the rounded corner hardly.
4. Put the little pin (red) into the blue marked guide.
5. Rotate left and right to make sure it fits well.
6. Use a screwdriver to fix the screw.
7. Find the arrow markings on the base plate and the visor cover and put them
on top of each other.
8. First press the locking pins of the inner cover into the recess with the arrow
and then into the other two recesses.
12
2
4