Bissell PROHEAT 2X PREMIER 47A2 Serie Guia Del Usuario página 7

Before you clean
1. Move furniture to another area if cleaning
an entire room (optional).
2. Pick up all loose dirt, debris, and pet hair
before deep cleaning. It is recommended that
you vacuum the area prior to deep cleaning.
3. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the corner
farthest from your exit.
4. Pretreating (optional) is recommended to
improve cleaning effectiveness for heavily soiled
carpet in high traffic areas such as entryways
and hallways.
BISSELL Stain Pretreat
a. Spray the BISSELL Stain Pretreat formula
onto heavy traffic areas, soiled areas, or
stains.
b. Allow to penetrate for at least 3 minutes.
c. Clean as normal following the instructions
on the next page.
Machine Prep
1. Fill the 2-in-1 Water Tank. Remove the tank
from the base of the machine by lifting up the
tank carry handle. Carry like a bucket to the sink.
2. Unlatch the top of the tank from the bottom
by lifting up on the tank latches on either
side of the tank.
3. Pour 5 ounces of formula into the heavy duty
bladder (fill the included measuring cup twice).
Fill the rest of the heavy duty bladder with hot
(140°F/60°C MAX) tap water. DO NOT BOIL OR
MICROWAVE WATER.
NOTE: Always use genuine BISSELL 2X
formulas to maximize cleaning and for the
safety of your machine.
4. Place the top of the tank back on the
bottom and secure the latches on both sides.
NOTE: Remember to secure the tank latches
on either side of the tank and test to make sure
they are secure before picking up the tank.
ATTENTION
Some Berber carpets have a tendency tofuzz
with wear. Repeated strokes inthe same area
with an ordinary vacuum ordeep c leaner
may a ggravate this condition. Please see S tain
Removal instructions on page l b
2.
3. 4.
/ WARNING
To reduce therisk o ffire andelectric shock
due tointernal component damage, use
only BISSELL cleaning fluids i ntended foruse
with thedeep c leaner.
www.BISSELL._