Sears Kenmore 66513293K110 Instrucciones De Instalación página 13

Select UL Listed/CSA Approved twist-on wire connectors rated
to connect your power supply cord to 16-gauge dishwasher
wiring.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
o
fill (ii!ili i i _ i ili i ili i ili i ili iili i ili iili i ili i ili iili i ili iili i ili i ili iili i ili_ Grouod.
Remove the green grounding screw and place through the ring
terminal of the green ground wire. Reattach and tighten the
green screw.
3_
Powe r Co rdmCo n nect
remaining wires
)
NOTE: Do not pre-twist stranded wire. Twist on wire connector.
Gently tug on wires to be sure both are secured.
Connect wires black to black and white to white, using UL
Listed/CSA Approved twist-on wire connectors.
Tighten strain relief screws to secure cord.
Place wires inside terminal box. Insert tabs on left side of cover.
Make sure wires are tucked inside box. Close cover ensuring
wires are not pinched. Use 1/4" nut driver or Torx T20
screwdriver and previously removed screw to secure cover.
NOTE: Do not plug into outlet until instructed to do so.
13