Jog dial display
1. Operation display
Displays play position, with one revolution equivalent to 135 frames. The display rotates
during playback, and stops during pause.
2. Cue point position display
Displays the position of cue points.
3. Audio/video memory status display
Flashes during writing to the audio/video memory. While indicator is flashing, it may not be
possible to record real time cue points or hot cue points.
4. Jog touch detector indicator
When VINYL mode is set to ON, this indicator lights when the top panel of the jog dial is
touched.
5. VINYL mode indicator (Vinyl)
Lights when VINYL mode is set to ON.
Rear panel
5
DIGITAL
OUT
6
1. POWER OFF (—)/ON (_) switch
2. NORMAL/DJ switch ( P.14)
If this switch position is changed during playback, playback
will stop, and then resume playback from the disc's begin-
ning.
DJ: For jog dial, tempo variation and other DJ operations.
During DVD playback, subtitles and some other functions,
operations, or playback points may not be supported.
NORMAL: DJ functions are not supported. Pause mode is
silent, not audible. During DVD playback, selected audio sig-
nals are output from the digital output connectors. During
CD playback, digital data containing subcodes are output (does
not support CD graphics).
3. CONTROL connector
Using the supplied accessory control cord, this connector can
be connected to a Pioneer DJ mixer (sold separately) to al-
low control of this unit from the DJ mixer. This facilitates the
use of functions such as fader start play and back cue.
Alternately, linking this connector to another DJ player allows
automatic relay play ( P.41).
4. AUDIO OUT L/R connectors
RCA type analog audio output connectors.
5. Main video output connectors (VIDEO OUT)
Includes RCA and BNC type connectors for outputting DVD
playback video only (composite signals), as well as S-Video
output connector.
4
3
2
AUDIO OUT
R
L
NORMAL
CONTROL
DJ
COMPOSITE
VIDEO OUT
S
S
SYNC IN
PREVIEW OUT
7
8
Before Operating (Names and Functions of Parts)
Before Operating (Names and Functions of Parts)
POWER
6. DIGITAL OUT connector
RCA type coaxial digital output, for connecting AV amplifier,
Dolby Digital/DTS decoder, CD recorder, etc.
When NORMAL/DJ switch is set to "DJ", during DVD play-
back the unit outputs 2-channel linear PCM digital data, re-
gardless of the selected audio signal format. During CD play-
back, the unit outputs only audio data that do not include
subcodes.
When NORMAL/DJ switch is set to "NORMAL", during DVD
playback the unit outputs digital data in the audio signal for-
mat selected. During CD playback, the unit outputs digital
data including subcodes.
7. Preview video output connectors (PREVIEW OUT)
RCA type connector (composite signals) and S-Video output
connector. These connectors output monitor images used to
aid the DJ during operation. Outputs various guide messages
and displays ( P.12).
8. SYNC IN connector
BNC type input connector for inputting external sync signal.
Use to connect optional dedicated sync signal generator.
9. AC inlet (AC IN)
Use auxiliary power cord to connect to standard electrical
outlet.
1
OFF
ON
AC IN
9
<DRB1416> En
1
2
3
4
5
11