Assembling The Display Housing; Final Steps - Seca 676 Manual De Usuario

Assembling the display

Final steps

68 •
1. Take the display cable out of the fixing in the railing.
housing
2. Connect the display cable in the railing to the cable
of the display housing.
3. Push the cable carefully into the railing.
4. Place the display housing on the railing.
5. Ensure that the bores on the display housing and
the bores in the railing are in line over one another.
6. Screw the display housing firmly to the railing.
1. Ensure that all parts are correctly located.
2. Ensure that all screws are fully tightened.
3 x B 3.5 x 9.5
Display cable